HomeBlogsHow ceiling fan motor works?

How ceiling fan motor works?


Ceiling fans use a motor to turn the blades that create airflow. The fan motor is made up of several components, including the housing, rotor, stator, and capacitor. The rotor is the part of the motor that rotates and is located around the outside of the stator. Stator windings are coils of insulated wire that create a magnetic field when fed electricity. When electricity is provided, the rotor is drawn to the stator’s magnetic field and starts rotating, driving the fan blades through a series of belts and pulleys. The capacitor helps regulate the power going to the motor, allowing it to spin at different speeds. This allows you to adjust your ceiling fan’s speed settings and make sure it runs efficiently. With all these components working together, your ceiling fan is able to circulate air throughout the room and keep you cool on hot summer days. 

With proper maintenance, your ceiling fan motor can continue running for years. Make sure to clean it regularly with a vacuum cleaner and check that all its components are in working order. If your fan motor stops running, it’s possible you may need to replace the capacitor or other components for it to work properly again. Following these steps can help ensure that your ceiling fan continues providing cool air throughout the summer and fall.


Finally, ceiling fan motors can be very powerful, so make sure to keep yourself and others safe when working with one. Carefully read all the instructions that come with your fan motor before attempting any repairs or maintenance. With some basic knowledge and proper care, you can ensure your mini ceiling fan continues running for years to come!


How to disassemble ceiling fan motor?

If you're looking to disassemble your ceiling fan motor, it's important to make sure you have the right tools and know-how. For starters, you'll need a Phillips-head screwdriver, needle-nose pliers, and a wrench. You'll also need some patience as the process can be tricky!

Start by unplugging the fan and removing the light kit and blade arms, if present. Then, unscrew the screws holding the motor housing and separate it from the mounting bracket. Next, remove any decorative pieces that are covering access to the inside of the motor housing.

Inside you should find a fan-blade hub attached to the outer shaft, and a motor-shaft bearing attached to the inner shaft. Unscrew the nut that holds these two pieces together. This will allow you to remove both the hub and bearing from the motor housing.

Finally, use your Phillips screwdriver to unscrew any additional screws on the motor itself. Once all of these screws are removed, the motor should be able to be pulled out of the housing.

With the fan disassembled, you are now ready to repair or replace any faulty components. Make sure to reassemble your 3 blade ceiling fan before use! With proper care and maintenance, your ceiling fan motor should last for years to come.


Previous article
Next article